Photography Portfolio – part 2

Photography Portfolio – part 2

(This is the next installment following Photography Portfolio – part 1.)

Having sent out two sets of images, each to a different lab for printing,  I have received both sets of prints.  They all look great.  Both sets were printed on archival inkjet paper, but two different brands … Epson Premium Luster for the sports images and Museo Silver Rag for nature/landscape.  Premium luster is a lightly coated paper with a very slight pearl texture.  Although I have seen Museo Silver Rag referred to as luster, I am inclined to say that it is semi-matte (one notch below luster), with a subtle sheen and subtle paper texture.  The density of black color is not as good on Silver Rag (compared to the Epson Premium Luster), but is quite good considering this is an uncoated paper.  In retrospect, I am very happy with both choices.

Acadia National Park
Acadia National Park

 

For sports images, I mounted each to a pure black presentation board.  The presentation boards were pre-cut to size and are solid black through the core.  From the print lab, each print had a broad white border; I trimmed down the borders to maybe 1/16 inch before mounting to boards.

For nature images, I did not want black or white, so I selected an off-white color mat board.  General-purpose mat board can be inexpensive, but depends upon the particular board.  Sheets 32×40” may cost less than $9. But this is only practical if you have the tools to easily and accurately cut the boards.

All said and done, including shipping, 32 prints cost me more than $400. Mounting boards cost an additional $1.20 – $2.00 per print.  A spray-can of adhesive can cost as little as $10 for non-archival and as much as $20 for acid-free archival.   Because a portfolio is not meant to last forever, there is no point in spending extra dollars for acid free adhesive or acid-free mounting boards.

Photography Portfolio – part 1

If you have a set of images, is that a gallery or a portfolio?  To my thinking a gallery can be any set of images, they need not even be related in any strong way.  In contrast, a portfolio is a very closely edited collection of 20-30 images, your very best.

A portfolio can be presented in many ways, but foremost in my mind are these four: contained in a book, individual prints, digitally on a web site, or digitally on a tablet computer.  Today, a professional photographer probably needs at least two of these four.  Most recently, I have been working on a print portfolio.  The last time I did this was years ago.  (I should probably burn those old prints because they cannot hold a candle to my recent work.)

The last time I created a print portfolio, the prints were all made on chromogenic paper … chemically treated paper that is light-sensitive and processed with chemicals to permanently fix the image onto the paper.  These types of prints are still very common, can be very inexpensive, and can create stunning images.   The image can be projected onto the paper either using traditional film enlargers or digital enlargers, such as a LightJet.  Chromogenic prints are continuous tone, unlike inkjet/giclée prints.

Bicycle race
Bicycle race

For my new portfolio, I am employing only giclée (a.k.a. inkjet) prints. These types of prints offer far more options with regard to the paper.  There are dozens of paper manufactures, each offering a variety of surfaces, textures, and contrast characteristics.  It’s all very confusing.  Photographers, who print often, have experience with several papers and have learned a few favorites for different types of images.  But that’s not me.

After a ton of research, I selected a specific paper and a lab that offered this paper at a reasonable price.  But before uploading my images to a print lab,  I thought to check the image via soft proofing.  Because printed images are dramatically different than images displayed on a computer monitor, soft proofing is a software feature that compensates for paper and ink, then shows on a computer monitor an approximation of what the print will look like.  I downloaded a color profile specifically for the paper I had intended to use, then displayed the soft proof using Adobe Lightroom.  The result was absolutely awful.  My best efforts were not enough to make the image look good, and I ultimately abandoned the paper, did more research, and selected a different paper.

Very briefly, let me say that a single print 11×14” or 8×12” can cost anywhere from $13 to $60, depending upon the particular lab, how much personalized care they give to each print, and the particular paper you choose.  (If you buy multiples of the same print, the additional copies typically cost less than the price for the first one.)  Compare this to a print on chromogenic photo paper, which might cost only $4 to $15.

When I began to place my order for prints, they informed me that my preferred paper was no longer available. Again, I returned to research and selected a third paper.  Because the lab offered a specific set of papers, I limited myself to just those papers that this lab supported.  Having already uploaded my images to the lab, I spoke directly with someone at the lab, to confirm that my paper choice was right for these particular images.  (Specifically, I did not want glossy or matte, but rather something in between that would provide very good color saturation and contrast.)   Unfortunately, the lab also informed me that the prices advertised on their web site had all been changed recently (they had neglected to update the web site).  Despite the paper changes and price increases, I chose to stick with this particular lab rather than go back to research and look for another lab that might possibly be less expensive.

More to come . . . .